Please wait...

SPY CENTER LPS

Central system comparison >

New

Spy Center LPS is the new Linergy power and centralised control system for low power

• Expandable, flexible and modular system with 4/8 circuits each 700 W and 1500 W and a maximum of 20 units installed per circuit
• Low installation costs with final installed circuits that do not require E30 fire resistant cables if installed in the fire compartment
• Advanced and simple to use system for monitoring a single device and/or the circuit without additional wiring. Freely programmable lighting circuits and devices, remote maintenance and viewing, lamp operation check and monitoring via the SCLAN card included

 

MAIN FEATURES

• Decentralised power system compliant with EN 50171
• Compliant with EN 50172 for the safety of lighting systems
• With automatic monitoring system in accordance with EN 62034 to check the operation of all devices connected at regular intervals
• Independent system with mixed mode operation non maintained N/M and maintained M
• The tests are stored for a period of 5 years through an integrated electronic event log
• Foreign language compatible
• Up to 20 devices can be managed per end circuit
• 4/8 final circuits with mixed mode operation maintained M and/or non maintained N/M
• Selectable lamp load according to the type of battery
• Status information via the display system
• Inputs freely assigned to each circuit or device
• Connectivity via RS 485 interface for external line monitor and input bus interfaces
• Ethernet port with TCP/IP protocol for intranet/internet connection
• Incorporated web server for remote system management over the internet

 

INTERNAL I/O SERIES MODULE

• 8 potential free inputs
• Selectable NC/NO
• 8 relay outputs 230Vdc / 6A
• Potential free exchange contacts

 

REMOTE SIGNALLING ON SCPSR SYNOPTIC PANEL

• System ON
• System error
• Battery
• Network functions
• Error sound warning

 

MONITORING MODULE FOR INDIVIDUAL SCMDL-L DEVICE

• Module addressable from 1 to 20 and supplementary input for ON function by means of 230Vac switch

 

BLOCK DIAGRAM 

SCL-Block-diagram

 

BATTERY CURRENT AND CAPACITY


Battery 12V / 7Ah   Battery 12V / 12Ah




1h 4,0 A ~ 900 W   7,0 A ~ 1500 W
       
3h 1,6 A ~ 350 W
  3,1 A ~ 670 W
       
8h 0,8 A ~ 180 W
  1,40 A ~ 300 W

 

IP54
General data
  • Body: steel RAL 7035
  • Supply voltage: 230V 50Hz or 3x400V 50Hz (monitoring devices included)
  • Battery: 216V (18x12V-7Ah 45 kg or 18x12V-12Ah 70 kg)
  • Weight: 60,5 kg without batteries
  • Dimensions: 600 x 1000 x 250 mm
PHOTOGALLERY
ACCESSORIES
ACCESSORIES
  • SCMDL-L - MODULE FOR MONITORING INDIVIDUAL EMERGENCY LAMP L
  • SCML - EXTERNAL MODULE FOR LINE MONITORING